Product Information:

Makita HR2630 Combination Hammer The Makita HR2630 Combination Hammer, a 26mm, Powered by a Powerful 800W Motor, provides 1,200 rpm. The HR2630 offers 3-modes of operation (hammering, hammering with rotation, and rotation), with an operation mode change lever to switch between modes. and an ergonomically designed handle with a rubberized soft grip fits your hand perfectly to provide maximum control and comfort. In addition, double insulated to protect the user, Variable speed allows the user to control the speed. The torque limiter reduces gear damage, and the reversing helps quickly remove screws and other fasteners. Dust collecting system helps provide a cleaner work environment and ensures reliability and long life. Powerful Features: Double insulation: Double or reinforced insulation is another method of protection against electric shock, consisting of an extra layer of supplementary insulation over the basic insulation, or the live parts. Double insulation devices protect the user through two independent isolation systems. These systems protect electric motor components from the outer motor housing and tool holding areas. Variable speed: Variable speed control allows the user to match the speed to the application they are working on. Reversing: After drilling, setting the bit direction to reverse spins it counterclockwise to help it come out of the hole cleanly and easily. You'll also use reverse mode to quickly remove screws and other fasteners. Torque Limiter: A torque limiter is a built-in clutch reduces gear damage by disengaging gears if the bit binds. Dust Collecting: The dust collector is designed to reduce the amount of dust produced during cutting and concrete dust generated during drilling on the job site, allowing you to work efficiently and comfortably. Makita Combination Hammer Features: Easy-to-grip handle ergonomically designed to give maximum power thrust. 3 operation modes - hammering, hammering with rotation, rotation. Less bit wobbling. One-touch sliding chuck for easy bit change. Operation mode change lever positioned on the bottom of gear housing for reduced possibility of breakage. Adapted for SDS-PLUS Shank. Makita Combination Hammer Accessory: Side Grip. Depth Gauge. Carry Case. Note: The tool does not come with a bit. Specifications: Continuous rating input / 800W Capacity / Concrete : 26mm (1") Capacity / Steel : 13mm (1/2") Capacity / Wood : 32mm (1-1/4") Impacts per minute (ipm) / 0-4,600 No load speed (rpm) / 0-1,200 Sound pressure level / 91dB(A) Sound power level / 102dB(A) Vibration level / Hammer drilling: 15.5m/s² / Chiseling: 9.5m/s² Drilling: 2.5m/s² Dimensions (L x W x H) / 361x77x209mm (14-1/4"x3"x8-1/4") Net weight / 2.8kg (6.2lbs) Power supply cord / 2.5m (8.2ft)